B-1
OPERATION
WELDMARK 225
B-1
GENERAL DESCRIPTION
The Weldmark 225 is a twin-cylinder, gasoline driven,
multiprocess arc welder and AC power generator. It is
built in a heavy gauge steel case for durability on the
job site.
DESIGN FEATURES
AC/DC STICK WELDING (Constant Current)
•
AC 40 - 225 Amps
•
DC 40 - 210 Amps
•
100% Duty Cycle on All Settings
•
Output Selector with 6 Ranges
•
Output Control for Fine Current Adjustment
•
Use with a broad range of AC & DC Electrodes
Including Fleetweld
®
5P
DC SEMIAUTOMATIC WIRE FEED WELDING
(Constant Voltage)
•
CV Tap Setting for 60-200 Amps.
•
100% Duty Cycle.
•
Excellent Performance with .068
”
(1.7mm)
NR
®
-211-MP Innershield
®
Electrode.
•
Limited MIG Welding with L-50 & L-56 using blended
Argon Shielding Gas.
•
The Recommended Wire Feeder is the LN-25, but
Can Also be Used with the LN-7 Wire Feeder.
(LN-7 and LN-25 without Contactor Requires the
K240 Contactor Kit).
AC/DC TIG WELDING (Constant Current)
•
AC & DC TIG Welding Can be Done at All Constant
Current Output Range Settings.
AUXILIARY POWER
•
8000 Watt AC 115/230 Volt 60 Hz. Generator.
•
Operates AC Power Tools.
•
Powers Battery Chargers.
•
Powers a 1.5 HP Motor (If Started Under No Load).
•
Lights Eighty 100 Watt Incandescent Bulbs.
•
Can be Used for Standby Power.
OTHER FEATURES
•
Bottom Mounted 9 Gallon Fuel Tank with a
Convenient Top Fill and Fuel Gauge.
•
Polarity Switch for Selecting DC+, DC-, or AC
Welding Output.
•
K930-1 TIG Module Available.
•
Remote Control Receptacle Kit Available.
•
Electronic Engine Idler. Engine Automatically Goes to
Low Idle in 10 to 14 Seconds after Welding or Use
of Auxiliary Power. Includes High Idle Switch.
•
Electric Starting.
•
Battery Charging Ammeter.
•
Full 8 KVA Auxiliary Output Receptacle.
•
Factory Installed Engine Hour Meter.
•
Engine Protection Shuts Engine Down in the
Event of Low Oil Pressure.
•
Built-in Feet for Easy Mounting to Truck Bed or
Trailer.
•
All Copper Alternator Windings and High
Quality Insulation for Long-Life and
Dependability.
•
Powder Painted Case and Base for Outstanding
Corrosion Protection.
•
Quiet muffler with reversible exhaust feature; either
right or left side of machine.
ENGINE FEATURES
•
Air Cooled, Twin-Cylinder.
•
Cast Aluminum Alloy Crankcase with Integral Cast
Iron Cylinder Liners.
•
Electric Start with Solid State Battery Charging
Module.
•
Solid State Breakerless Ignition.
•
Spin on Oil Filter.
•
Low Oil Pressure Shutdown Protection.
In addition to the above, the Kohler Command Engine
has overhead valves and hydraulic valve lifters.
