Lincoln Electric PRO 155 Operator'S Manual Download | Manualshive

Page: 37 / 46

background image

E-1

E-1

TROUBLESHOOTING

PRO 155

If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.

CAUTION

This Troubleshooting Guide is provided to help you
locate and repair possible machine malfunctions.
Simply follow the three-step procedure listed below.

Step 1. LOCATE PROBLEM (SYMPTOM).

Look under the column labeled

“

PROBLEM (SYMP-

TOMS)

”

. This column describes possible symptoms

that the machine may exhibit. Find the listing that
best describes the symptom that the machine is
exhibiting.

Step 2. POSSIBLE CAUSE.

The second column labeled

“

POSSIBLE CAUSE

”

lists

the obvious external possibilities that may contribute
to the machine symptom.

Step 3. RECOMMENDED COURSE OF ACTION

This column provides a course of action for the
Possible Cause, generally it states to contact your
local Lincoln Authorized Field Service Facility.

If you do not understand or are unable to perform the
Recommended Course of Action safely, contact your
local Lincoln Authorized Field Service Facility.

HOW TO USE TROUBLESHOOTING GUIDE

Service and Repair should only be performed by Lincoln Electric Factory Trained Personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician and
machine operator and will invalidate your factory warranty. For your safety and to avoid Electrical
Shock, please observe all safety notes and precautions detailed throughout this manual.

__________________________________________________________________________

WARNING

«
...
35
36
37
38
39
...
»

Summary of Contents for PRO 155















































Reviews:

No comments

Related manuals for PRO 155

Brand: Zenith Pages: 24

Interlogix 60-875 Simon

Brand: GE Pages: 40

Brand: GE Security Pages: 2

Brand: Olympia Pages: 5

Brand: Xilica Audio Design Pages: 10

Brand: Cal-Royal Pages: 40

Brand: Teac Pages: 3

BrewZilla 100L - Gen 4

Brand: KegLand Pages: 48

Masterweld 204T

Brand: AES Pages: 31

Brand: Ewellix Pages: 18

Brand: VENCO Pages: 21

Brand: Neopost Pages: 119

ZS 80 KST Extreme Series

Brand: steute Pages: 20

Brand: Parweld Pages: 16

Brand: Parweld Pages: 16

HOME THEATER SPEAKERS

Brand: Sonance Pages: 8

Brand: Laars Pages: 9

Brand: Commell Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands