A-4
INSTALLATION
PRISM® L SERIES ASSEMBLY
TOOLS NEEDED
• 5/16" Nutdriver
• 3/8" Nutdriver
• 1/2" Nutdriver
• 9/16" Nutdriver
• 9/16" Box Wrench
• Appropriate Hoist and Rigging
• Liquid Sealant
• Strip Foam Gasket
• Miscellaneous Hand Tools
• Ladder/Lift
• Drill
• 1/4" Drill Bit
STEPS 1-10: L17587-1, L17587-2, L17587-3,
L17587-4, L17587-6, L17587-10, L17587-12,
L17587-13, L17587-14, L17587-15,
L17587-16, L17587-18, L17587-19,
L17587-20, L17587-21, L17587-22,
L17587-23, L17587-24, L17587-25,
L17587-26, L17587-27, L17587-28,
L17587-34, L17587-35, L17587-36,
& L17587-37 ONLY
STEPS 11-23: L17587-5, L17587-7, L17587-8,
L17587-9, L17587-11, L17587-17, L17587-29,
L17587-30, L17587-31, L17587-32,
L17587-33 ONLY
Step 1 – Unpack the leg base w/ hopper
Unpack leg base w/ hopper assembly and place it in desired
location
FIGURE A.1
STEP 2 – PREPARE MAIN BODY FOR
INSTALLATION ON TO LEG BASE
FIGURE A.2
STEP 3 – INSTALL MAIN MODULE ON LEG
BASE/HOPPER
Apply strip foam gasket (supplied in hopper carton) completely
around top of hopper flanges as shown. Apply gasket on both
sides of holes and overlap in corners, then place a bead of liquid
sealant between foam strips.
FIGURE A.3
Orient leg
base so this
control panel
is on left
side of unit
when facing
door
Rear inlet side
Door
side
Remove packaging
in preparation for
lifting main module
on to leg base.
Location for 3/8”
bolts (2 per leg)
Location for 3/8”
bolts (2 per leg)
Strip foam
gaskets
Add Liquid
Sealant
Strip foam
gaskets
PRISM
®
Summary of Contents for Prism 4
Page 31: ...A 23 INSTALLATION d Reclasp filter handles FIGURE A 15 PRISM ...
Page 77: ......