WARNINGS
Read all instructions before using MINIFLEX
Important safety instructions –
Save these instructions
When using an electrical appliance, basic precautions
should always be followed, including the following:
•
The use of this machine in conjunction with the pick-up
of ingredients in weld fume has not been investigated
by CSA Group.
•
This fume extraction unit shall NOT be used to pick up
anything that is hot or burning.
•
Use only as described in this manual. Use only
manufacturer’s recommended attachments.
•
Do not use with damaged cord or plug. If appliance is
not working as it should, has been dropped, damaged,
left outdoors, or dropped into water, return it to a
service center.
•
Do not pull or carry by cord, use cord as a handle, close
a door on cord, or pull cord around sharp edges or
corners. Do not run appliance over cord. Keep cord
away from heated surfaces.
•
Do not unplug by pulling on cord. To unplug, grasp the
plug, not the cord.
•
Do not handle plug or appliance with wet hands.
•
Do not put any object into openings. Do not use with
any opening blocked; keep free of dust, lint, hair, and
anything that may reduce air flow.
•
Keep hair, loose clothing, fingers, and all parts of body
away from openings and moving parts.
•
Turn off all controls before unplugging.
•
Do not use to pick up flammable or combustible liquids,
such as gasoline, or use in areas where they may be
present.
•
Connect to a properly grounded outlet only. See
Grounding Instructions.
This appliance must be grounded. If it should
malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of
electric shock. This appliance is equipped with a cord
having an equipment-grounding conductor and
grounding plug. The plug must be inserted into an
appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
This appliance is for use on a nominal 120-V circuit and
has a grounding attachment plug that looks like the plug
illustrated in FIGURE 1. Make sure that the appliance is
connected to an outlet having the same configuration as
the plug. No adaptor should be used with this appliance.
FIGURE 1
The installer is responsible for following Federal, State
and Local safety codes and regulations.
ELECTRIC SHOCK can kill.
•
Do not touch electrically live parts such as
internal wiring.
•
Turn the input power off at the fuse box
before working on this equipment.
•
Have a qualified person install and service this
equipment.
MOVING PARTS can injure.
•
Do not operate with covers open or filter
removed.
•
Keep away from moving parts.
Only qualified personnel should install, use or service this
equipment.
To Reduce The Risk Of Electric Shock –
Do not use on wet surfaces.
Do not expose to rain. Store indoors.
To Reduce The Risk Of Injury From Moving
Parts – Unplug Before Servicing
TO REDUCE THE RISK OF
ELECTRIC SHOCK – UNPLUG BEFORE
CLEANING OR SERVICING.
WARNING
WARNING
WARNING
WARNING
CAUTION
WARNING
SAFETY
