12
OPERATION
MINIFLEX
®
PORTABLE WELDING FUME EXTRACTOR
OPERATING
INSTRUCTIONS
The MINIFLEX provides enough suction for one fume gun or small
suction nozzle. Do not attach more than one fume gun or suction
nozzle to the MINIFLEX unit.
1. Connect the extraction hose at one side to the air
inlet of the machine (Figure 3, Item A) and at the
other side to the welding torch or small suction
nozzle.
2. Lay the work cable of the welding machine into the
slot on top of the machine (Figure 4, Slot) (when
using Automatic Start/Stop mode).
3. Start up the machine by pressing the switch, located
on the side of the machine.
4. At the top of the unit, there is a High/Low button and
an Automatic Start/Stop Button (See Manual Vs.
Automatic Start/Stop Operation for further
instructions).
FIGURE 3
Recommended Positioning: Upright
For optimal performance, unit is designed to operate in upright
position.
If unit is operated in an upright or horiz ontal position, air
inlet and outlet (Figure 3, Items A and B) must be free
from obstruction.
WARNING
