Lincoln Electric K3590-1 Manual Download Page 3

Page: 3 / 7

Step 2:

Front Crossmember

Using a 1/2” wrench and socket, install the front crossmember (L17288) to the two side rails

(L17286 & L17287). Use (4) 5/16-18 x 1.00 hex head cap screw, (4) 5/16-18 hex nuts, (4) 5/16”

plain washers, and (4) 5/16” lock washers. Leave bolted connections finger tight.

Figure A- 2

Summary of Contents for K3590-1

Page 2: ...wo limiter brackets to the front crossmember as shown Using a 9 16 wrench and socket attach with 4 3 8 16 x 1 25 hex head cap screw 4 3 8 16 hex head nuts 8 3 8 plain washers 4 3 8 lock washers Torque the 3 8 16 bolts to 15 ft lb Figure A 1 ...

Page 3: ...rench and socket install the front crossmember L17288 to the two side rails L17286 L17287 Use 4 5 16 18 x 1 00 hex head cap screw 4 5 16 18 hex nuts 4 5 16 plain washers and 4 5 16 lock washers Leave bolted connections finger tight Figure A 2 ...

Page 4: ...e rear crossmember L17289 to the two side rails L17286 L17287 Use 4 5 16 18 x 1 00 hex head cap screw 4 5 16 18 hex nuts 4 5 16 plain washers and 4 5 16 lock washers Tighten all bolts on the front and rear crossmembers now Torque all 5 16 hardware to 8 ft lbs Figure A 3 ...

Page 5: ...a wheel onto each end of the axle shaft with the longer hub oriented toward the side rail and the Air Valve hub side facing out c Place a 1 washer on the axle and then attach an E Clip to each end of the axle shaft to hold the wheels in place d Grease each wheel hub with grease gun Figure A 4 ...