Lincoln Electric K2803, Operator'S Manual

Page: 12 / 34

English English 9
CRUISER™ SYSTEM CHECKLIST (See Cruiser Connection Diagram)
 Place Power Wave
®
AC/DC 1000 SD CE in suitable operating location.
 Place the Cruiser™ Tractor in it’s operating location.

Connect K2683-xx Heavy Duty ArcLink Control Cable (5 pin) between Power Wave
®
AC/DC 1000 SD CE and the
Cruiser™ Tractor.
 Install Work Voltage Sense Lead (21) from the Power Wave
®
AC/DC 1000 SD CE per recommended guidelines.
 Connect / Install welding cables per recommended "Output Cable Guidelines" (see Table1: Output Cable
Guidelines)
 Open the Power Wave
®
AC/DC 1000 SD CE front panel and check the DIP switch settings per the decal on the
panel. Factory Setting is “Master-Lead”. ( see Figure #2: Dip Switch Settings) .
 Connect input power to Power Wave
®
AC/DC 1000 SD CE per recommended guidelines

Turn on Power Wave
®
AC/DC 1000 SD CE, and verify all system Status Lights are solid green.
 Select a Welding process and configure starting and ending options.