Lincoln Electric INVERTEC V276, Operator'S Manual

Page: 15 / 33

OPTIONS / ACCESSORIES
REMOTE OUTPUT CONTROL - Consists of a control
box with choice of two cable lengths. Permits remote
adjustment of output, 6 pin connection.
Order K857 for 25 ft. (7.6m) or
K857-1 for 100 ft. (30.5m)
TIG OPTIONS
Hand Amptrol - may be used in place of the Foot
Amptrol. Fastens to the torch for convenient thumb
control. Comes with a 25 ft. (7.6m) cable.
Order K963-1 (for smaller handle 9, 17 or 20 series
torches.)
Order K963-2 (for larger handle 18 or 26 series torch-
es.)
STICK OPTIONS
Accessory Kit - Complete kit for stick welding.
Includes 30 ft. (9.1m) #3 electrode cable, 25 ft. (7.6m)
#3 work cable, headshield, work clamp and electrode
holder.
Order K704 for 400 Amps
Order K875 for 200 Amps.
V276 4-Pack and 8-Pack Inverter Racks Includes:
• Inverter Rack
• An ideal system to group several inverter power
sources in an industrially designed portable pack-
age. Entire system meets National Electric Code
(NEC) standards.
• Includes 4 or 8 Invertec V276 rack model power
sources. This special rack version has all the same
features as the standard V276.
ACCESSORIES INVERTEC
®
V276
C-1
Tweco Style Plug (Male)-
For 1/0-2/0 (50-70mm )
cable.
Order K3416-70
Tweco Style Plug (Female)-
For 1/0-2/0 (50-
2
2
70mm ) cable.
Order K3417-70
Twist-Mate Cable Plug - For connecting welding
cable to output terminal receptacles. For 1/0-2/0 (50-
70mm
2
) cable.
Order K852-70
Twist-Mate Cable Plug -
For connecting welding
cable to output terminal receptacles. For 2/0-3/0 (70-
95mm
2
) cable.
Order K852-95
Twist-Mate Cable Receptacle - For connecting weld-
ing cable to Twist-Mate cable plug. For 1/0-2/0 (50-
70mm
2
) cable.
Order K1759-70
Twist-Mate Cable Receptacle - For connecting weld-
ing cable to Twist-Mate cable plug. For 2/0-3/0 (70-
95mm
2
) cable.
Order K1759-95
TIG OPTIONS
Tweco Style TIG Torch Adapter
Order K960-1
Twist-Mate Torch Adapter - For connection of PTA-9
or PTA-17V torches (1 piece cable) to power sources
without as passing through the Twist-Mate connec-
tion.
Order K960-1
Foot Amptrol™ - Varies current while welding for
making critical TIG welds and crater filling. Depress
pedal to increase current. Depressing pedal fully
achieves maximum set current. Fully raising the
pedal finishes the weld and starts the after flow cycle.
Includes 25 ft. (7.6m) control cable.
Order K870