MAINTENANCE
SAFETY PRECAUTIONS
ELECTRIC SHOCK can kill.
•
Disconnect input power by removing
plug from receptacle before working
inside machine. Use only grounded
receptacle. Do not touch electrically
“
hot
”
parts inside machine
•
Have qualified personnel do the mainte-
nance and trouble shooting work.
ITEMS REQUIRING
NO MAINTENANCE
•
Drive Motor and Gearbox
–
Lifetime lubrication
•
Wire Reel Spindle
–
Do NOT lubricate shaft
ROUTINE AND PERIODIC
MAINTENANCE
BEFORE EACH USE
•
Check over machine and accessories for any obvious condi-
tion that may prevent safe performance or operation. Repair
or replace items as necessary to correct any abnormal con-
dition.
AFTER 5 MINUTES OF WELDING
or when spatter accumulates in the gas nozzle:
•
Clean the contact tip and gas nozzle to avoid bridging
between the nozzle and contact tip. Bridging results in a
shorted nozzle, poor welds and overheated gun. Hint: Anti-
stick spray or gel available from a welding supply distributor
may reduce buildup and aid in spatter removal.
D-1
MAINTENANCE
D-1
HANDY MIG
WARNING
Summary of Contents for handy mig
Page 27: ...HANDY MIG HINGE DOOR ASSEMBLY FOR CODE 10919 ONLY...
Page 28: ...NOTES HANDY MIG...
Page 29: ...NOTES HANDY MIG...