8695 6650 / C
B - SAFETY INSTRUCTIONS
POSIMATIC PS30
B-3
Ensure that the equipment's working cannot be jammed by tools
and/or objects left near moving parts, or by rotating pieces which
could hit fixed parts (ground, stands, posts, workshop frames, etc.).
Imperative:
an operator corridor must be clear over a minimum width
of 800 mm according to safety standard NF EN 547-1 -3.
Never use the positioner table as a sheet metal working table or
heat the workpiece without taking basic precautions.
If the equipment is used for welding, make sure that the ground
of the power source is connected to the piece before you start
welding.
Never modify the machine.
The positioner
is not
designed for
anchoring or lifting equipment
The use of Personal Protective Equipment (PPE) is
mandatory
.
Clean the working area from time to time.
Machine
maintenance
must be carried out
with all the energy
supplies switched off.
The disconnection and padlocking of all
energy sources is
mandatory
.
3 - IMPORTANT
RECOMMENDATIONS
When starting-up or when changing a connection, there is one chance
in two that the connection of phases will be inverted, in which case the
tilt limit switches become totally ineffective and there are great risks of
damage (refer to chapter page D17).
