F - MAINTENANCE
8695 6650 / C
F-24
POSIMATIC PS30
PROCEDURE FOR ADJUSTMENT OF THE TILTING MOTOR BRAKE
Untighten the nuts «
2
».
Adjust the air gap «
T
» with the screws «
1
» or nuts «
3
», and set it to the
minimum value mentioned in the table below.
When adjustment is done, hold the screws «
1
» in position and tighten the nuts
«
2
».
WARNING :
The air gap has to be be checked regularly. It has to be inside
the min. and max. values mentioned in the table. A too high value can lead
to a more noisy braking and can prevent the unbraking.
With a unbraking lever, a too large air gap can lead to a null braking torque.
WARNING :
The distance «
X
» has to be higher than in the table. The
thickness of the brake pad has to be higher than 1.5mm.
