manualshive.com logo in svg

Lincoln Electric 12879, Operator'S Manual, Page: 44 / 56

Share
Download
Lincoln Electric 12879 Operator'S Manual Download Page 44

OPERATION

APEX

®

 3 SERIES MIG PENDANT MANUAL

B-33

Hide Program Passes

The passes in a program base can be hidden by 
highlighting the program base and pressing the 
steering knob, collapsing the group. Press the steering 
knob again and it will expand.

Saving to a USB

All of the examples shown have been saved locally to 
the pendant. They can also be saved to a USB.

The USB has a folder set up specifially to save or 
read files. If this folder is missing then a prompt will 
appear on the screen – see 

FIGURE 43 - USB Folder 

Notification

. If the flash drive is new, the system will 

create a folder. 

To access files already saved on the USB, move them 
to the specified directory. 

Note: A USB file name is restricted to 8 characters. 
Local files can be up to 16 characters. The only 
program name blocked is “Lincoln”.

Copy to/from USB

With the USB inserted, a Copy Icon appears in the 
bottom left of the screen - see 

FIGURE 44 - Copy 

Icon.

Press the Copy Selection Button. 

A copy of the selected program is made – see 

FIGURE 

45 – Copy to USB

If the file is currently saved on the USB, it will save to 
the Pendant, if it is a Local file (saved to the pendant),  
it will save to USB. 

FIGURE 44 - Copy Icon

FIGURE 43 - USB Folder Notification

Summary of Contents for 12879

























































Reviews:

No comments