Lincoln Electric 07005010NG, Safety Instruction For Use And Maintenance

Page: 15 / 46

8695 4788 / A
C - DESCRIPTION
OPTITOME HPC 2
C-11
Size A (mm) B (mm) C (mm) D (mm)
1530 2550 4375 1500 3000
2010 3050 2550 2000 1000
2040 3050 5325 2000 4000
2060 3050 7380 2000 6000
This is a single-piece machine made up of a mechanically welded cutting table, with,
on each side, a guide rail with ball slides and a rack to guide and move the beam
Two guide rails with ball slides and a rack are fixed to the beam, to guide and move
the tool carriage
The high feed speed is 15m/min
A console cabinet to be fastened to the floor contains all the electrical and electronic
equipment that is required for control and operator dialogue
4 - CUTTING TABLE
This is a mechanically welded box that is fixed to the floor between the machine
frame, and which has a

350 outlet for connection to an extraction system. For this
table, we recommend the use of extraction with filtration that is suited to machine
performance.
A removable support frame for the piece to cut, made of sheet metal for plasma
cutting, is placed on the box.
The bottom contains slag collector boxes that are easily removable for cleaning.