7
LINCE ITALIA S.p.A.
3 SETTINGS AND VISUALIZATION
From the default screen, by pressing the menu key, you can access to the settings of the system and the keypad after entering the
access code.
PROGRAMS
S..
SUPER-KEYS
STATUS
EVENTS MEM
NEW KEY
NEW CODE
CODES MOD.
SETTINGS
Fig. 7
16:29
A
B
C
D
E
F
G
H
Table 5
Part.
Identification
A
Programs:
allows to activate or partialize the system and to manage the favourite commands
B
Super-key:
allows to switch the super-keys
C
Status:
allows to view the system status as memories, wireless or wired inputs, excluded inputs
D
Events memory:
displays the system events memory
E
New Key:
allows the storage of transponder keys
F
New code:
allows the storing of access codes (administrator, user, installer)
G
Codes modification:
allows the modification of a number code, its attributes or a key
H
Settings:
allows you to change some parameters of the keyboard
3.1 PROGRAMS
From the programs section it is possible to arm/disarm and to partialize the system.
OK
P1
P2
P3
Fig. 8
16:29
G1 G2
G3
3.1.1 Programs commutation
To proceed with program switching, simply press the program to be switched and press OK. Once the program has been switched,
the writing of the relative key will change colour becoming white (disarmed) and colored (armed); the possible colours are red for G1,
yellow for G2 and green for G3.
If inputs are opened, the following warning message will be displayed, before arming, which makes it possible to force the arming of
the programs excluding temporarilly the opened inputs.
Info
Open inputs, exclude them temporarily and activate?
YES
NO
CHECK
Fig. 9
It is also possible to view the open inputs by pressing “CHECK”.
