background image

3

LINCE ITALIA S.p.A.

1. OVERVIEW

The manual describes how to install and use the 9573-GOLD-TCH-EN (white) and 9574-GOLD-TCH-EN-B (black) touch keyboards 

operating on BUS for the management of all GOLD series control panels. The keyboard is user-friendly, it does not allow configuration 

of the system, but only the display of events, accesses and system management.

Compatibility note:

It is not possible to access the control panel with the INSTALLER code.

1.1  INTRODUCTION TO THE USE OF THIS MANUAL

For all parameters and problems strictly related to the configuration of the system, it is suggested to refer to the manual of the control 

panel. 

1.2 

GENERAL FEATURES

• 

Display 4,3”;

• 

ABS case;

• 

“Emergency lamp” function;

• 

reading of the room temperature;

• 

can be mount 503 box;

1.3  TECHNICAL FEATURES

9573-GOLD-TCH-EN/9574-GOLD-TCH-EN-B

Power supply

11 ÷ 15 Vdc.

Power absorption

100 mA @ 13.8 Vdc

Working temperature

5 °C ÷ 40 °C

Dimensions

145x80x17 mm

Weight

145 g

1.4  PACKAGE CONTENTS

Fig. 1 

Table 1

Part.

Descritpion

A

Keyboard

B

Instruction manual

C

Wall fixing kit

D

Cable for BUS connection

A

D

C

B

Summary of Contents for 9573-GOLD-TCH-EN

















Reviews: