IS 318 ECN 3607
Page 9 of 12
OA7909 Floor stand
Position floor stand and level on adjustable feet. Adjust height of stabilising
brackets (Fig 4 - A).
Mark and drill floor for stabilising brackets B. Fix into position.
Position Salamander on top of floor stand, lining up holes in frame with pierce nuts
in appliance base.
Fix appliance to stand using 4 M8 x 50mm screws.
Fig 4
OA7908 Bench stand
Screw M8 x 16mm screws into front 2 pierce nuts in the base of the appliance.
Attach mounting brackets to the rear of the base of the appliance using 2 No.6 self-
tapping screws.
Fit appliance onto bench stand, locating screw heads in the keyhole slots (Fig 5 -
A).
