Lincat OE7503 User, Installation, Servicing And Conversion Instructions Download Page 6 | Manualshive

Page: 6 / 15

Lincat OE7503 User, Installation, Servicing And Conversion Instructions Download Page 6

IS 469 ECN 3607

Page 6 of 15

Connect via a suitable isolating switch, which should be easily accessible in the
event of an emergency. Connection is made at the rear of the appliance, behind
the lower rear panel (Fig 2

– panel removed for clarity). Release the protective

cover on the terminal housing using a flat bladed screwdriver and fit the cable into
the strain relief and then the terminal block.

Commissioning

Commissioning must include an operational check of all controls. Operate the
appliance several times as per Operating Instructions.

Ensure that the end user understands how to operate, shutdown and clean the
appliance, and is aware of the position of the isolating switches.

OPERATING INSTRUCTIONS

Only qualified or trained personnel should use this appliance.

Controls

Fig 3

A Drain valve drip
  trough
B Drain valve oven
chamber
C Water inlet tap
D Amber neon
E On/Off switch
F Check valve c/w tap

«
...
4
5
6
7
8
...
»

Summary of Contents for OE7503
















Reviews:

No comments