IS 782 ECN 4729
Page 3 of 38
KEEP THIS MANUAL FOR FUTURE REFERENCE
This manual contains important safety and installation-operation instructions. All
users/operators should be required to read this manual before operating the oven.
Failure to follow the instructions contained in this manual may cause injury or
death, damage to the oven and will void the warranty.
Warnings and Precautions
This appliance must be installed, commissioned and serviced by a qualified person in
accordance with national and local regulations in force in the country of installation.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified person.
Ensure that the mains supply plug and wall socket is accessible at all times.
Strip any plastic coating and clean the appliance before use with a soft cloth.
During operation parts may become hot - avoid accidental contact.
Disconnect this appliance before servicing conducting any maintenance or cleaning.
Precautions to avoid possible exposure to excessive microwave energy
If the door or door seals are damaged, the oven must not be operated until it has been
repaired by a competent person.
It is hazardous for anyone other than a competent person to carry out any service or
repair operation that involves the removal of any cover which gives protection against
exposure to microwave energy.
Avoid possible exposure to microwave energy - never try to operate with the door open.
It is important that the door seals properly when operating, therefore if the door seals
or hinges are damaged, do not use the appliance until it has been repaired by a
competent person. The door seal must always be kept clean and debris free so that
they perform the function of sealing the cavity when the microwave is operating.
As a combined microwave and convection oven be careful using any plastic utensils.
Liquids or other foods must not be heated in sealed containers or closed glass jars
since they are liable to explode.
