Instruction Manual for RF remote control unit SEAV for TECH-system
Page 6 of 10 oct. 2017 ver. 02.
LINAK Danmark A/S - Mønstedsvej 9- DK-8600 Silkeborg -Telephone (+45) 86803611 - www.linak.dk
Connection
.
Terminal 1:
12/24 V DC/AC
Terminal 2:
Supply
–
0V
Terminal 3:
Output channel 1
Terminal 4:
Output channel 1
Terminal 5:
Output channel 2
Terminal 6:
Output channel 2
Set relay function (SW1)
Monostable function = Active while the transmitter button is pressed and held.
Remote-controlled SEL button = Monostable function
–
can be used to code new transmitter.
120 sec. delay circuit = Active for 120 sec. after the button is released.
Bistable function = changeover relay function.
SEL button
Push button
to select
channel to
code the
transmitter
LED for
channel 2
(CH2)
LED for
channel 1
(CH1)
SW1
Set relay
function
J1
Jumper to
select
power supply
voltage
12 V DC/AC
24 V DC/AC