Instruction Manual for RF remote control unit SEAV for TECH-system
Page 5 of 10 oct. 2017 ver. 02.
LINAK Danmark A/S - Mønstedsvej 9- DK-8600 Silkeborg -Telephone (+45) 86803611 - www.linak.dk
Transmitter; TXS 2
Installation
To achieve optimal conditions for communication between transmitter and receiver, it is important to
choose transmitter location with care. Range is determined not solely by the technical specifications of
the units in question. The range may therefore vary depending on radio-electrical conditions at the
installation site.
Installing the receiver:
To remove receiver cover, unscrew screw C. Then, using the 3 screw holes (labelled A), mount the
transmitter with three suitable screws.