Page 20 of 31
Mechanical emergency lowering
Emergency lowering is meant for lowering the bed if a power failure occurs and the bed needs to be driven down into
horizontal position.
1. Disconnect TD5 from mains.
2. Take hex key on side of TD5.
Underneath the TD5 are two gaps for mechanical lowering.
3. Place hex key in gap, one end at a time, and turn hex key in direction indicated by arrow.
It is important to turn the key in the direction indicated on the housing. Turning the key in the wrong
direction can wreck the inner hex and make mechanical emergency lowering impossible.
Do not use an electric screwdriver for lowering, use the hex key enclosed on the TD5.
