Page 13 of 24
Figure 7
DL1A cable
DL1A
DP/WDPL
Mains cable
DL1A
Hook for cable relief
Electrical connection of the DL1A system
The DESKLINE
®
DL5/DL6 system is to be connected as shown on figure 4. Each DL5/DL6 is to be connected to the sockets on
the control box by means of the motor cables, which have an 6-pin plug in each end.
Please note that the control box must only be connected to the voltage stated on the label.
Finally, the mains cable is to be mounted and power switched on.
CBD4/CBD5/CBD6 with earth
The CBD4/CBD5/CBD6 earth cable to be mounted on the desk construction (typically the top frame)in a way that ensures good
electrical contact. The function of the earth cable is to earth the desk and ground static electricity. The earth connection does
not protect other electrical products.
CBD4/CBD5 with mains cut-off (non ZERO models)
If the power cable is damaged it has to be replaced by an authorized LINAK service centre to avoid any danger.
