15
After you have selected the input, the display shows the bit rate
and format of the current music.
Connecting a Dual AES input
Some audio equipment, for example, upsamplers or sound servers, can
output in Dual AES. Dual AES features lower jitter than single AES or
SPDIF.
Some audio equipment has two single AES outputs that carry
identical data. This is not the same as Dual AES, and will not
give a good stereo image if you set Dual AES mode manually.
To avoid this, we recommend using the Auto setting for Dual
AES.
1.
Using XLR cables, connect your LINA Network DAC to the source
equipment. Ensure the cables are not swapped.
•
Connect the AES1 (or AES A) output on the source
equipment to the
AES 1 socket on the unit.
•
Connect the AES2 (or AES B) output on the source
equipment to the
AES 2 socket on the unit.
2.
Switch on the source equipment.
3.
If possible, play music on the source equipment to generate an
audio signal.
4.
Ensure that Dual AES is enabled on the unit.
5. Change the source input on the unit to DUAL AES.
►
For more information, see "Changing the source input" on
page 22.
After you have selected the input, the display shows the bit rate
and format of the current music.
Summary of Contents for Network DAC
Page 31: ......
