4
6. Handle the device carefully and use in accordance with
mentioned specifications only.
ZERO ADJUSTMENT
The scanner is always set to zero after switching on and displays the
measured value when the bottom sensor of the device touches the
material.
1. Keep hands away from the bottom sensor.
2. Pay attention to dry hands when using the scanner.
REFERENCE MEASURING
First find a dry area on a material and use it as a reference value,
moisture rating - dry.
Now you can quickly detect higher humidity or leaks as the
measured value increases, either by moving the device over this
surface, or making point to point measurements.
BATTERY
On the left upper corner, a battery level indicator is visible. Replace
battery if the bar indicator is flashing to avoid wrong measuring
values.
SAFETY
1. This device was designed and tested considering the safety
regulations for electronic devices. The trouble- free operation
can only be guaranteed if the usual precautions and safety
instructions in this manual are observed if using the device.
2. Reliability of the device can only be guaranteed if the device
is not exposed to any other climatic conditions as mentioned
under “Technical Specifications”.
3. If the device is transported from a cold to a warm environment,
make sure that the device temperature can adjust itself to the
ambient temperature before switching on. Device safety may be
at risk if:
• There are visible damages to the unit
• The device is not working as specified
• The device has been stored under unsuitable conditions for a
longer time.
In case of doubt, please return device to manufacturer for repair or
maintenance.
GB
