3
SAFETY &
CLEANING
INSTRUCTIONS
DO’s
DON’Ts
Follow all instructions.
Keep these instructions.
Heed all warnings.
Do not install near any heat sources,
do not expose the product to flames
or use near naked flame sources.
Do not use flammable solvents near
or on this product.
Do not use any attachments
other than those supplied by the
manufacturer.
To avoid tearing when replacing
the hand skin, you can apply talc
to the inside, this will prevent
friction occurring when fitting the
hand skin.
Clean the product with a damp
soft cloth or sponge, using only
warm water with mild detergent,
after every training session.
Tension must be set back to 0
(lowest tension) when product
is not in use.
Apart from hand skin removal, do not
disassemble the product or attempt
to repair a faulty unit, please return
the product to Limbs & Things for
assessment and repair.
Stand not to be pulled on with force
while training.
READ THE SAFETY INSTRUCTIONS CAREFULLY BEFORE
USING YOUR COLLES’ FRACTURE REDUCTION TRAINER
Talc
Powder
Do not allow young children
to use this product.
Do not inject liquid into the product,
it is not intended for anaesthetic
injections.
If a product is damaged or worn, it should
be repaired by Limbs & Things. To arrange
this, please contact your point of purchase
who will be able to provide a repair quote.
Take care when removing cast
so not to damage the skin
