6
STEP 1
STEP 2
installation guide
Always use two people when setting up the base.
Place the bed base box in a desired location with the bottom of the
box facing up .
Remove the binding straps and packing materials, making sure not
to puncture the box with any sharp objects .
Remove the bed base from the box keeping the bottom of the base
facing upwards .
STEP 3
STEP 4
To sync two bases with the SmartSync
™
cord - see page 14-15.
To install headboard brackets: See detailed installation
instructions on page 10-11.
Uncoil the Power Down Box from the frame and
install (2) 9 Volt batteries- not included .
Place box on the ground . Ensure that it is
easily accessible when the base is turned to its
upright position .
For customer support call: US
1-866-723-3882
Legs are shipped fully assembled. Alternative heights in 3"
increments can be achieved by removing leg segments.
To install the legs, thread the washer over the bolt of the leg
with the recessed side facing the leg, and tighten by hand. Do
not over tighten.