Limber Bed 690 Series Owner'S Manual Download Page 3

1

safety precautions and usage statements

Attention: Important Safety Disclaimers

Read all instructions before using your adjustable base. Save these instructions.

To reduce the risk of shock, burns, fire or injury: 

Always unplug the base from the electrical outlet before servicing 

any part of the base . To reduce risk of electric shock, unplug the 

base before cleaning . To safely disconnect, ensure the base is in a flat 

position with all motors off, and unplug from power source . 

Keep the power cord away from heated surfaces . Never operate the 

base when the air openings are blocked . Keep air openings free of lint, 

hair and the like . Do not drop or insert any object into any opening .
Discontinue use of the bed base and contact a qualified service center 

if: it has a damaged cord or plug, if it is not working properly, or it has 

been dropped into water . 
Only use this bed base for its intended use as described in 

this manual . Do not use accessories/attachments that are not 

recommended by the manufacturer .
Close supervision is required when the bed base is used by or near 

children, convalescents or disabled persons .

Outlet Safety: For optimal safety and operation, plug bed base into 

a surge protector (not included).

The bed base should only be plugged directly into a wall outlet or 

surge protector (strongly recommended) . Improper connection of the 

equipment can result in the risk of electrical shock, electrical fire or 

faulty operation of this bed base . If the plug does not fit your outlet, 

contact a qualified electrician to install a suitable outlet . Unauthorized 

modification or failure to use a wall outlet or surge protector could 

void the electrical portion of your warranty .

Warranty Warning:

Do not open or tamper with control box, motors, or remote (with 

the exception of battery compartments) . The warranty will be void 

if the internal workings of these components are tampered with . For 

complete warranty information refer to the warranty card included 

with the base .

In-Home Use and Hospital Disclaimer:

Limber Bed

 

adjustable bed bases are designed solely for in-home 

use . This base was not designed as a hospital bed and is not designed 

to meet hospital standards . Do not use this base with TENT TYPE 

oxygen therapy equipment or near explosive gases . 

Pacemaker Notice:

This product contains Neodymium MAGNETS which may interfere 

with devices such as pacemakers, ICD’s and any other device sensitive 

to magnetic fields . It is STRONGLY recommended that owners of such 

medical devices consult their physician prior to using this product .
It is possible that some pacemakers may falsely interpret the optional 

massage feature vibrations as movement/exercise . This is a common 

occurrence with any product that creates a vibrating movement and 

may not affect the pacemaker . Please consult your physician before 

using the massage feature .

Pets and Small Children:

Immediately dispose of all packing materials as it may pose a

smothering risk to small children and pets . To avoid injury, it is not 

advised to allow children and small pets to play on or under the bed .

Children should not operate the bed base without adult supervision .

safety precautions and usage statements

Summary of Contents for 690 Series





















Reviews: