Q: I cannot boot my system after connecting USB MONITOR.
A: in case i851 chipset once – Board Type PC system, please disable „Legacy
USB support‟ option in system.
BIOS setup method may differ from PC to PC, please refer to the User manual
of the PC. Please refer to Microsoft homepage for more detail.
Q: I cannot see DOS opening screen with USB MONITOR when my PC is
booting up.
A: USB MONITOR is using USB device. Since DOS doesn‟t recognize USB
Device while booting –up, USB MONITOR cannot get video signal from the
system.
Q: I cannot run 3D graphic game with USB MONITOR screen.
A: USB MONITOR is using USB 2.0 interface (480Mbps) for video data transfer.
Therefore any program that requires 3D high speed graphic acceleration
cannot be displayed properly.
Restricted Programs.
Real Player (Doesn‟t support Extension Mode)
3d Graphic Games
Programs that requires Direct X graphic acceleration
Power DVD
Win DVD (Version 5 or later)
Supported Multimedia Players
1.
Windows Media Player (Version 10 or later)
2.
GOM Player
3.
KM Player
Q: How to uninstall “USB MONITOR installation software”
A: „Control Panel‟
→
„Program Add/Remove‟
→
„Display link Core software‟
→
Click „remove‟.
Q: How many USB MONITOR can be connected to one PC?
A: USB MONITOR is a generic USB device. Theoretically a PC can recognize up
to 127 USB devices. However with the latest PC system, we recommend
number of USB monitors and each respective PC system requirements as
below.
1.
1
～
2 USB MONITOR connections -1.2GHz CPU/512 MB Memory
2.
3
～
5 USB MONITOR connections -1.8GHz CPU/1GB Memory
3.
6 USB MONITOR connections -1.6GHz Dual core CPU/1GB Memory
Display response rates on each a USB monitor may vary upon the PC‟s
resource management status.
Q: USB MONITOR information remains in my „Display Properties‟ even after
disconnect or power off the USB MONITOR.
A: The deactivated USB information implies power off or disconnected USB
Summary of Contents for 1/C/T
Page 1: ...10 1 USB Monitor Manual...
