Lilitab P Basic Head Unit
Assembly Instructions v2.0
3
ASSEMBLY INSTRUCTIONS
3.
Insert your tablet.
Lay the Head Unit face
up and connect the charge cable.
NOTE: Before inserting your tablet, ensure the
charge port is on the same side as the charge cable.
2.
Thread the charge cable
from the top of the
mount pole through the opening located in
the center of the Head Unit and pull through
to the front side.
Refer to your Lilitab Mount owner’s manual
for instructions on attaching the Head Unit.
1.
Remove faceplate:
1. On the back of the Head Unit, pinch
together the faceplate release clips.
2. While still pinching the clips, flip the
Head Unit over and slide the faceplate
left, away from the home button, and lift
up to remove the faceplate.
1. SLIDE LEFT 2. LIFT UP
4.
Install faceplate
by sliding the faceplate
onto the Head Unit in the same fashion you
removed it, but slide right, towards the
home button.
NOTE: The faceplate only fits in one direction—
therefore if it doesn’t slide easily, please reverse
the direction—do not force it.
Simply reverse these steps to remove your tablet.
1. INSERT 2. SLIDE RIGHT
