RAID MODE JUMPER SETTINGS
Y1
Y0
X1
X0
Switch: SW6/SW7
1
2
3
4
5
6
7
SATA RAID hard disk storage system can be installed for four HDDs at various RAID modes.
Please set the switch at the following table:
HDD
4
4
4
SATA Port
X0/X1/Y0/Y1
X0/X1/Y0/Y1
X0/X1/Y0/Y1
SW6
OFF
OFF
ON
SW7
OFF
ON
OFF
RAID Mode
RAID-0 (Stripping)
RAID-0+1
NRAID
Based on different applications, the following RAID mode is highly recommended:
For DVR application, if one HDD is failure and gets replaced for a new one, the video of the rest HDDs can still
be retrieved. There is a risk for loosing the video on the failed HDD. However, if the video is very critical,
RAID-0+1 is recommended.
1. DVR application:
If the data is very important, RAID-0+1 is recommended.
2. Data critical application:
4
DISABLE BUZZER
To disable buzzer, please set J2 jumper accordingly.
J2 : Buzzer ON : 1, 2
ON (default)
Buzzer OFF : 2, 3
ON
X0
J2
3 2 1
ON
OFF
BUZZER
