Untighten the right
knob, put the Alarm
and RS-485 cables
through the hole and
tighten the knob
Connect the
telemetry control
(RS-485) to RS-485
Input
(TXDI+,TXDI-)
Connect the Alarm
input cable to Alarm
Input
(Alarm 1 & GND)
Connect the video
cable to output jack
2. Connect Video cable:
Untighten the middle
knob, put the video
cable through the hole
and tighten the knob
3. Connect Alarm, telemetry control (RS-485) and Video cables:
C A U T I O N
*
*
For better waterproofing, please use one cable with one knob only.
(Recommended)
When using two cables with one knob, please fill the seam between
cables with waterproof glu to make it waterproof.
Cable diameter for the knob : 5~12mm
3
All manuals and user guides at all-guides.com
