When "Camera Select", "Record Select", "Record Mode", "Record Frame Rate", "Video Quality" and
"Alarm Setup" are set, [REC] key on the front panel must be pressed and system will start recording
according to the setting.
When recording is activated, monitor screen will show as below
To stop recording, press [ ] key.
To start recording, press [REC] key.
To stop recording, press [ ] key.
Note
When recording is activated, no other function keys can be operated. Stop recording before
any other operation.
*
n
n
Recording
Recording Indicator
Recording HDD
M : Master
S : Slave
Record Schedule
To check hard drive storage capacity or record frame rate, press [SELECT] key. Monitor screen will
show current recording frame rate and hard drive usage percentage. Press [SELECT] again to exit.
Hard Drive Storage Capacity and Frame Rate Status
14
Record frame rate
Used HDD storage
1
2
3
4
<
> 2003 / 01 / 11 / 16 : 35 : 25
M
0%
EACH
Recording Mode
EACH or QUAD
1
2
3
4
30FPS
6334MB
<
> 2003 / 01 / 11 / 16 : 35 : 25
M
0%
EACH
HDD usage in %