5
Viking™ M mobile lift
•
7EN137107 Rev. 1
www.hill-rom.com I www.liko.com
Dimensions
Note: The measurements are based on the lift being equipped with standard sling bar. When changing to other lifting accessories, check that the lift still
achieves desired lifting height.
*
Different measurements apply to Viking M depending on the height-setting position, see “Assembly”.
** Reference measurement according to Standard EN ISO 10535:2006.
Assembly
Before assembly, make sure you have the following parts:
• Locking handles
• Battery
• Instruction guide, charger cable,
charger connector cable.
• Lift mast with lift arm, lift motor incl. cable, sling bar and
control box with handcontrol
• Base with motor for base-width adjustment, incl. cable
Viking M
Measurements: mm /
inch
Top view
Lateral view
B
B1
F
F1
Amax.
B2
Amin.
**600 mm (24 in)
E
M
N
O
Max. reach position of lift arm
B
3
L
min
Lmax
C
D2
D
Max. reach position of lift arm
D1
**700 mm (28 in)
Amax.* Amin.*
B
B1
B2
B3**
*
C
D
D2**
E*
F
F1 Lmax* L
min*
M
N
O
max.
min.
max.
min.
2020
1970
1920
1440
1390
1340
1230
870
660
650
650
595
1110
690
970
560
195
1100
1050
1000
105
30
1790
1740
1690
520
470
420
385
220
495
79.5
77.6
75.6
56.7
54.7
52.8
48.4
34.3
26.0
25.6
25.6
23.4
43.3
27.2
38.2
22.0
7.7
43.3
41.4
39.4
4.2
1.2
70.5
68.5
66.5
20.5
18.5
16.5
15.2
8.7
19.5
1. Lock both rear wheels.
Place the lift mast in
the foot of the base.
2. The lift mast has three height setting positions;
- low position for lower lifting heights.
- standard position recommended in most cases.
- high position for extra high lifting height.
The distance between two holes is 50 mm (2 in).
See chapter "Dimensions" for measurements.
3. Secure the lift mast with the
locking handles provided. Adjust
the position of the locking
handles so that they point
downwards.
low position
standard position
high position
