Liko Sabina, Assembly Instruction Manual, Page: 14 / 37

www.liko.com 49
Sabina™
Hook assembly
Bygelskruv, set
Assembly Instruction
Monteringsanvisning
Prod. No. 20290042
3SE690202-02
2012-03-19
www.liko.com
© Copyright Liko AB
This instruction applies to all of the above products.
(Pictures show the mounting on Sabina ll, but the installation is the same for all the above products)
5.479
Tools required
4 mm / 0,16 inch
Contains: Qty:
A Twin Lock Washer 2
B Screw K6S M6x20 2
Fits: Prod. No:
Sabina (all models) 2020001-2020005
Sabina 200 2020020
Capella 5021001
Sabina Seatstrap Slingbar 2027006
Sabina II Seatstrap Slingbar 2027007
Sabina II 350 Slingbar 2027002
Sabina II Comfort Slingbar 2027003
NOTE
Make sure the twin lock washers are
fixed together as shown below.
Tighten the screw firmly.
1. 2.
NOTE
- Make sure the Hook Assembly is installed according to these instructions.
- After installation, pull on the hooks (C) to make sure they do not come off.
- Make sure the latch (D) is mounted.
- Repairs and maintenance may only be performed by personnel authorized by
Hill-Rom/Liko and using original Liko spare parts.
MAKE SURE THE HOOKS ARE INSTALLED AS THE PICTURES SHOWS:
C
D
Screw and hook curve
always on the same side.
A
B