8
www.hillrom.com
7EN160186 Rev. 9 • 2020
Lift the patient. Pull down the pants as far as possible.
Lower the patient onto the toilet. Fold away the leg supports
and pull down the pants further for better accessibility.
Place the leg supports under the patient’s legs. Cross the
leg supports by feeding one leg support loop through the
other.
First connect the upper strap loops, then the leg support
loops on the slingbar. See page 6-7 for instructions on how
to attach the sling loops to different sling bars.
Pull up the pants as far as possible.
If needed, place an incontinence pad
inside the pants before they are pulled
into place over the buttocks. Perform
the transfer and lower the patient into
the wheelchair.
Returning from Toilet to Wheelchair
Following are two descriptions of how to put the clothes back on after a concluded toilet visit. The option you choose
depends on the clothing and the physical state of the patient.
Alternative 1:
Leg supports outside the pants. This is suitable for inelastic pants.
Place the leg supports under the legs
but outside the pants.
Arms on the outside!
First connect the upper strap loops
to the slingbar, then the leg support
loops. See page 6-7 for instructions
on how to attach the sling loops to
different sling bars. Lift the patient.
