background image

Golvo

 

ServiceManual Golvo™ mobile lift (3EN400404 Rev 3)  

 

55

 

www.liko.com

  

Easy Strapper G7/G8, G77/G88

Monteringssats komplett lyftband G7/G8, G77/G88

Assembly Instruction

Monteringsanvisning

 

Prod. No. 20090069, 20090070 

3SE640248-03

2011-03-30

© Copyright Liko AB 

www.liko.com

1.

2.

3.

4.

 Mount the spare part, 

  assemble in reverse order.

 

 NOTE

  - After changing lift strap the Limit Switch must be tested by lifting maximum load all the way up to the highest position

  

through the entire lifting range. 

  - With the emergency stop out, move the liftstrap all the way up against the Limit switch. Check that the motor does not   

  operate when touching the Limit switch. 

  - Make sure the spare part is mounted according to the assembly instruction. 

  - Check all functions related to the changed spare part. 

  - Repairs and maintenance may only be performed by personnel authorized by Hill-Rom/Liko and using original Liko spare parts.

20090069 Contains:   Qty:  Fits: 

Easy strapper G7/G8 

Golvo 7000

 

 

Golvo 7000 ES Classic

 

 

Golvo 8000 (all models) 

  

20090070 Contains:   Qty:  Fits: 

Easy strapper G77/G88 

Golvo 7007 from S/N 7723630

 

 

Golvo 7007 ES Classic

 

 

Golvo 7007 LowBase

 

 

Golvo 8008 (all models) 

Now with grey strap and  

grey plastic details.

Tools required:

3mm

13mm

5.323-324

Summary of Contents for Golvo G7




























Reviews: