Liko Golvo 7000 Series, Service Manual

Page: 28 / 129

Assembly Instructions/Exchange
www.liko.com
Base - 7007 ES
4.1.1
1.
2.
IMPORTANT!
Secure the mast with two M6 screws (enclosed) in the upper
holes on the mast.
Note! Do not place any screws in the lower holes!
Start by unscrewing the transport safety plate (metal plate) at the
lower edge of the mast. Save the safety plate and screws for later
use if needed.
1. Place the mast on the center beam of the base, between the
two black plastic caps.
2. Push the mast forward, as shown in the illustration above, until
it snaps onto the center beam.
2 Screw the safety screws in the
lower holes on the mast. This rele-
ases the mast from the base and it
can now be taken down.
Remove the mast:
1. Remove the both safety screws
from the upper holes on the mast.
When the mast is free from
the base it must be supported
so it does not fall.
Note! Lock the wheels before you
begin assembling the lift.
1
2