6.0 Product Changes, Traverse Switch
Prod. No. 3124604
2014
Changes
Revision
Project
To prevent noise from carriages in rail curves, new design of dampers are developed.
The new dampers 31290125 (Damper) and 31290126 (Damper QR) are now delivered with the
Traverse switch, and are replacing 31290096 (Damper) and 31290097 (Damper QR).
Rev. 01
SUS000583
2012
Changes
Revision
Project
Two new designs of Dampers, that prevents the Carriages to be parked in the wrong
area of the Travers switch are now delivered with the Traverse switch.
The new Dampers 31290096 (Damper) and 31290097 (Damper QR) are replacing
31290072 (End Stop)
Rev. 01
1778
2011
Changes
S/N
Project
New attachment for the traverse switch actuator. The configuration allows change of
position of the actuator, from the fixed rail to the secondary rail in the overhead system.
The slimline pendant has expired so the Traverse switch stabilization bar has been updated
to fit the pendants that are used.
6052700
1102
2006
Changes
New Prod. No 3124604 (old Prod. No 3124603), due to changed traverse plate.
Prod. No 3124604 has Traverse plate prim according to drawing R3024023-3
Prod. No 3124603 has Traverse plate prim according to drawing R3024023-2
New design on traverse plate and actuator. The new actuator opens and closes in two seconds (four times faster).
The switch has new traverse plate that prevent stop of the carriages between the rails.
NB! Always use end stop adapters on the carriages!
Special Installation instruction for Traverse Switch.
Service Manual Traverse Switch
• 3EN120401 Rev. 7
9
www.liko.com
l
www.hill-rom.com
