Lika XAC80 PB, User Manual, Page: 26 / 60

XAC80 Profibus-DP
®
4.2 Mounting the encoder
•
Fasten the fixing plate
1
to the encoder using the three M4 screws
2
provided with the device;
•
mount the encoder on the motor shaft using the reducing sleeve (if
supplied); avoid forcing the encoder shaft;
•
fasten the fixing plate
1
to the rear of the motor using four M4 cylindrical
head screws
3
;
•
fix the collar
4
to the encoder shaft (apply threadlocker to screw).
NOTE
You are strongly advised not to carry out any mechanical operations (drilling,
milling, etc.) on the encoder shaft. This could cause serious damages to the
internal parts and an immediate warranty loss. Please contact out technical
personnel for the complete availability of custom made shafts.
MAN XAC80 PB E 1.0.odt 4 - Mounting instructions 26 of 60