EM58 • HS58 • HM58 POWERLINK
Now you need to link the installed encoder (that is: the module) to the PLC.
There are two ways.
1. In the
Toolbox – Hardware Catalog
window, enter the name of the
installed device (or just “Lika”) in the
Search
box; all Lika modules that
have been installed will be listed in the
Model Number
window.
2. Or check the
Powerlink
option in the
Network Type
section of the
Toolbox – Hardware Catalog
window and then scroll through the list
of the installed Powerlink devices in the
Model Number
window.
Select the required Lika CN device in the
Model Number
window (for instance,
the “Lika Electronic HM16_16384 Ethernet POWERLINK” module); a preview will
appear in the
Properties
window.
Figure 7 - Adding a module
MAN EM58_HS58_HM58 PL E 1.1.odt
Quick reference
41 of 108