Lika POWERLINK EM58 PL, User Manual, Page: 101 / 108

EM58 • HS58 • HM58 POWERLINK
6508 Operating time
[Unsigned32, ro]
This object contains the information on the operating time. The operating time
monitor stores the operating time for the encoder expressed in operating hours.
The operating time is stored in the encoder non-volatile memory as long as the
encoder is power supplied.
This object is currently not used in this encoder.
Default = FFFF FFFFh
6509 Offset value
[Integer32, ro]
As soon as you activate the preset, the current position value of the encoder is
saved in this object. The offset value is then used in the preset function in order
to calculate the encoder position value to be transmitted. To zero set the value
in this object you must upload the factory default values (see the
Restore
default parameters function on page 92).
For any further information on the preset function and the meaning and use of
the related objects refer to page 96.
Default = 0000 0000h
650B Serial number
[Unsigned32, ro]
This object contains the encoder serial number.
This object is currently not used in this encoder.
Default = FFFF FFFFh
NOTE
Always execute the Store parameters function to save the new parameter
values.
If the power is turned off, the parameters that are not saved will be lost.
MAN EM58_HS58_HM58 PL E 1.1.odt POWERLINK interface 101 of 108