LD30x
6 Operator menu
The menu provides one section with “Basic Parameters” (see section “7.1 Basic
settings” on page 14)and another section with “Operational Parameters” (see
section “7.2 Operational parameters” on page 16). On the display you will only
find those parameters which have been enabled by the basic settings. E.g. when
the Linearisation function has been disabled in the basic set-up, the associated
linearisation parameters will also not appear in the parameter menu.
All parameters, as good as possible, are designated by text fragments. Even
though the possibilities of forming texts are very limited with a 7-segment
display, this method has proved to be most suitable for simplification of the
programming procedure.
The subsequent table shows the general structure of the menu.
Detailed descriptions of all parameters will follow in section “7 - Set up
procedure“ on page 14.
6.1 Overview of basic parameters
LD300
LD301
LD302
LD303
Input characteristics Input characteristics Input characteristics Input characteristics
Brightness
Linearisation mode * Linearisation mode * Linearisation mode * Linearisation mode *
Preselection mode 1 Serial unit number
Preselection mode 2 Serial format
* This only appears with Modes "RPM" and "Count".
MAN LD30x E 1.0.odt
Operator menu
12 of 40
