Lika LD120-M7, User Manual

Page: 15 / 16

LD120
Reading the resolution
|AD
TRES
It reads the resolution value currently set.
X=10

0,01 mm, X=50

0,05 mm,
X=100

0,1 mm, X=1000

1 mm
Answer: XCHKS
Free resolution factor FrEE
|AD
RFRE
=X
[0.0001, 1.0000] It sets the free resolution factor
FrEE
(see section 6.3.2).
Answer: XCHKS
Reading the FrEE factor
|AD
TFRE
It reads the factor value FrEE currently set.
Answer: X.XXXXCHKS
Setting the datum value
|AD
RREF
=X
[-99999, 99999] Absolute reference value for the
measurement system. Resolution is 0.01.
Answer: ADRREF:XCHKS
Reading the datum value
|AD
TREF
It reads the datum value currently set.
Answer: ADTREF:XCHKS
Setting the Offset 1 value
|AD
ROF1
=X
[-99999, 99999] It sets the Offset 1 (
OFS1
) value
(resolution 0.01mm).
Answer: ADROF1:XCHKS
Reading the Offset 1 value
|AD
TOF1
It reads the Offset 1 value currently set.
Answer: ADTOF1:XCHKS
Setting the Offset 2 value
|AD
ROF2
=X
[-99999, 99999] It sets the Offset 2 (
OFS2
) value
(resolution 0.01mm).
Answer: ADROF2:XCHKS
Reading the Offset 2 value
|AD
TOF2
It reads the Offset 2 value currently set.
Answer: ADTOF2:XCHKS
Setting the Offset 3 value
|AD
ROF3
=X
[-99999, 99999] It sets the Offset 3 (
OFS3
) value
(resolution 0.01mm).
Answer: ADROF3:XCHKS
Reading the Offset 3 value
|AD
TOF3
It reads the Offset 3 value currently set.
Answer: ADTOF3:XCHKS
Save current value function
|AD
RSPE
=X
[0, 1] It saves the last value displayed before power
off.
X=0

oFF (function disabled)
X=1

on (function enabled)
Answer: 0000000XCHKS
Reading the save current value function
|AD
TSPE
It reads the current enabling status of the save
value function.
X=0

oFF, X=1

on
Answer: 0000000XCHKS
8 - Dimensional drawing and cut-out
8.1 Display Cut-out
Provide a 68 x 33 mm (w x h) cut-out.
8.2 SM5 sensor
Check details on product catalog.
MAN LD120 I_E 1.6.odt 15 www.lika.it
www.lika.biz