IF92
If the connection is established properly, a green tick
(
√
) appears next to the
DEVICE SEARCH
button and
the fields in the box below (
ENCODER
box in the
Figure) are filled with information about the
connected device. Furthermore the buttons in the
left navigation bar become active.
On the contrary, if the program is not able to
establish a connection to the device, a red X (
X
)
appears next to the DEVICE SEARCH button.
Should this happen, please check that the unit is
connected properly and the power is on. Make sure
that the power supply voltage is correct. Also check
that the characteristics of the serial cable meet the
necessary requirements. Ascertain that the drivers of
the serial port are installed correctly.
WARNING
In some cases the operator is required
to manually select the serial port the
device is connected to and then set,
manually again, the configuration parameters before
starting the identification process of the connected
device.
For any information always refer to the specific
documentation of the device.
MAN IF92 I_E 1.0.odt
11
www.lika.biz
