IF10
7.3 Encoder signal switcher
In1
Control 1
LO = In1, Hi = In2
Control 2
LO = In1, HI = In2
In2
Out1
Out2
RS422 or
HTL 10-30V
HTL 10-30V
or RS422
RS422 or
HTL 10-30V
HTL 10-30V
or RS422
A, /A, B, /B, Z, / Z
A, /A, B, /B, Z, / Z
A, /A, B, /B, Z, /Z
A, /A, B, /B, Z, /Z
Both inputs can be individually set to either symmetric (differential) format
using A, /A, B, /B, 0, /0 channels or to asymmetric (single-ended) format using A,
B, 0 channels only.
Acceptable input levels are RS-422, TTL and HTL 10-30V.
The output standard can again be selected individually for each output.
The outputs provide always all signals including the inverted channels, even
when no inverted signals are applied to the input.
Inputs Control1 and Control2 select the signal ways:
LOW:
the corresponding output is connected to input 1.
HIGH:
the corresponding output is connected to input 2.
MAN IF10 I_E 1.1.odt
7 - Applications
25 / 28
