IF10
4 - Mounting instructions
WARNING
Mount the unit with power supply disconnected.
IF10 universal encoder interface must be installed and protected inside the
electric panel. It provides DIN rail mounting and can quickly snap onto a DIN rail
with built-in DIN rail clips that require no additional brackets or supports.
4.1 Installation notes
The device is only allowed to be installed and operated within the permissible
temperature range (-20°C +60°C / -4°F +140°F). Please ensure an adequate
ventilation and avoid all direct contact between the device and hot or
aggressive gases and liquids.
Before installation or maintenance, the unit must be disconnected from all
voltage sources. Furthermore it must be ensured that no danger can arise by
touching the disconnected voltage sources.
Devices which are supplied by AC voltages must be connected exclusively by
switches or circuit breakers with the low voltage network. The switch or circuit
breaker must be placed as near as possible to the device and further indicated as
separator.
MAN IF10 I_E 1.1.odt
4 - Mounting instructions
18 / 28
