ES58 • EM58 MODBUS®
register where the cursor is placed. After having set a new value next to any
Holding Register, press the
button to transmit to the encoder all
Holding Registers data; or just press the
ENTER
key to send only the datum of
the Holding Register where the cursor is placed.
Inside the
FUNCTIONS
group box two further buttons are available:
Update FW
and
Manual frame
. The first button allows the operator to enter the page for
the firmware upgrade; the second button allows to enter the page where PDUs
can be transmitted manually. For complete information on the firmware
upgrade procedure please refer to the “5.4 Update FW page - Firmware upgrade”
section on page 45; for complete information on the manual transmission of
the PDUs please refer to the “5.5 Manual frame page – Transmitting PDUs
manually” section on page 48. If you press the
NORMAL
button you go back to
the main page.
5.3.2 Reading the Input Registers
In the largest group box on the left of the programming interface the Input
Registers are available, they provide result values and status / alarm information
on the device. These items are described in the “7.1.2 Input Register parameters”
section on page 76 of this manual.
MAN ESx58x_EMx58x MB E 1.3
Quick reference
36 of 92
