6
Through-‐Zero VCO Manual 0.1
Getting Started
Please refer to the ‘Installing Your Module’ section before
progressing to this chapter.
The general layout of the module is that inputs are on the left side of
the module and outputs on the right. The three pots at the top of the
module control frequency, and once set are unlikely to need
modification while using the module. It is also unlikely that the
switches will be used interactively.
Sync.
Input and
Offset
Control
VCO
Outputs
3 Exponential CV
Inputs. 2 1V/Oct,
1 Variable
Linear FM &
Through-Zero
Modulation
