4
3.1 Driver and software installation
Before software installation, exit the antivirus or virus protection softwares in your computer. The
software installation instructions in this manual are based on Microsoft Windows 7 system.
There is an installation disc in the accessory box. Insert the installation disc and you can see
the instructions. You can open the disc by manual if you do not see. Follow the instructions
and complete the installation of the whiteboard software. For complete functions click “Full
Installation” and complete the installation as shown below. The computer needs to be re-
started in order activate the software after the installation is completed. Save all the files in
the computer and restart.
4. Calibration
3. How to Install Software
4.1 Calibration
To work normally, the strokes on the whiteboard should coincide with the actual ones. A proper
calibration is the key to have such precision. The calibration is needeed when:
• the whiteboard is used for the first time.
• the whiteboard softwares have been reinstalled or updated.
• the position of the whiteboard or projector is changed.
• the computer connected to the whiteboard is changed.
• the computer resolution ratio or refresh rate is changed.
• calibration deviation caused by other reasons.
