Lightway PV Modules, Installation Manual, Page
5
/36
www.lightwaysolar.com
Check PV modules for damage due to transportation before they are installed; do not install damaged modules.
Contact the company you purchased the Lightway PV modules from in order to obtain information on making
claims for defective PV modules.
PV module surfaces are susceptible to damage that could affect the performance or safety of the PV module; do
not damage or scratch the PV module surfaces, and do not apply paint or adhesive to any of the surfaces,
including the frame. For your safety, do not disassemble or modify Lightway PV modules in any way. Otherwise
may degrade performance or cause irreparable damage and will void any applicable warranties.
If it is necessary to store PV modules prior to installation, the PV modules should remain inside the packaging and
protected from exposure that could compromise the durability of the packaging.
Selecting the location
•
Select a suitable location for installation of the module.
•
The module should be facing true south in northern latitudes and true north in southern latitudes for best
power production.
•
For detailed information on the best elevation tilt angle for the installation, refer to standard solar
photovoltaic installation guides or a reputable solar installer or systems integrator
•
The module should not be shaded at any time of the day.
Selecting the proper support frame
•
Always observe the instructions and safety precautions included with the support frame to be used with the
module.
•
No attempt must be made to drill holes in the glass surface of the module. To do so will void the warranty.
•
Do not drill additional mounting holes in the frame of the module. Doing so will void the warranty.